WIP: Add hetzner config

configuration/hardware-specific/hetzner/default.nix

@@ -0,0 +1,38 @@
+{
+  imports = [
+    ./hardware-configuration.nix
+    ./disko.nix
+  ];
+
+  systemd.network.networks."eth0" = {
+    matchConfig.MACAddress = "90:1b:0e:c1:8c:62";
+
+    addresses = [
+      # IPv4
+      {
+        addressConfig = {
+          Address = "116.202.158.55/32";
+          Peer = "116.202.158.1/32"; # Gateway
+        };
+      }
+      # IPv6
+      {
+        addressConfig.Address = "2a01:4f8:10b:3c85::2/64";
+      }
+    ];
+
+    networkConfig = {
+      Gateway = [
+        "116.202.158.1"
+        "fe80::1"
+      ];
+
+      DNS = [
+        "185.12.64.1"
+        "185.12.64.2"
+        "2a01:4ff:ff00::add:1"
+        "2a01:4ff:ff00::add:2"
+      ];
+    };
+  };
+}

configuration/hardware-specific/hetzner/disko.nix

@@ -0,0 +1,82 @@
+{
+  disko.devices.disk = let
+    bootPartition = {
+      size = "1M";
+      type = "EF02";
+    };
+
+    swapPartition = {
+      # 8G is apparently recommended for this much RAM, but we set up
+      # 4G on both disks for mirroring purposes.
+      #
+      # That'll still be 8G during normal operation, and it's probably
+      # not too bad to have slightly less swap if a disk dies.
+      size = "4G";
+      content = {
+        type = "swap";
+        randomEncryption = true;
+      };
+    };
+
+    mountOptions = ["compress=zstd" "noatime"];
+  in {
+    sda = {
+      type = "disk";
+      device = "/dev/sda";
+      content = {
+        type = "gpt";
+        partitions = {
+          boot = bootPartition;
+          swap = swapPartition;
+
+          disk1 = {
+            size = "100%";
+            # Empty partition to combine in RAID0 with the other disk
+          };
+        };
+      };
+    };
+
+    sdb = {
+      type = "disk";
+      device = "/dev/sdb";
+      content = {
+        type = "gpt";
+        partitions = {
+          boot = bootPartition;
+          swap = swapPartition;
+
+          disk2 = {
+            size = "100%";
+            content = {
+              type = "btrfs";
+              # Hack to get multi-device btrfs going
+              # See https://github.com/nix-community/disko/issues/99
+              extraArgs = ["-d" "raid1" "-m" "raid1" "--runtime-features" "quota" "/dev/sda3"];
+              subvolumes = {
+                "/volume" = {};
+                "/volume/root" = {
+                  inherit mountOptions;
+                  mountpoint = "/";
+                };
+                "/volume/home" = {
+                  inherit mountOptions;
+                  mountpoint = "/home";
+                };
+                "/volume/var" = {
+                  inherit mountOptions;
+                  mountpoint = "/var";
+                };
+                "/volume/nix-store" = {
+                  mountpoint = "/nix";
+                  mountOptions = mountOptions ++ ["noacl"];
+                };
+                "/snapshots" = {};
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}

configuration/hardware-specific/hetzner/hardware-configuration.nix

@@ -0,0 +1,25 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}